[SystemSafety] SIL ratings to be scrapped?

Inge, James Mr James.Inge782 at mod.uk
Fri Aug 23 12:22:05 CEST 2013


I believe that the aim of making these UK Defence Standards goal based was to allow flexibility, so that the MOD could specify the requirements it needs to meet its duty of care, but still gain the benefit of using the most appropriate modern industry standards.  As John points out, specifying a particular system in the Def Stans caused confusion as they were different to the various different systems specified in other standards.  Making Def Stan 00-56 goal based means that suppliers could propose to use standards like IEC61508, DO178C, ISO26262, or whatever is most appropriate for the project.  If there was a need to use a particular standard for some reason, this could still be specified as a project-specific requirement.

 

________________________________

From: systemsafety-bounces at lists.techfak.uni-bielefeld.de [mailto:systemsafety-bounces at lists.techfak.uni-bielefeld.de] On Behalf Of RICQUE Bertrand (SAGEM DEFENSE SECURITE)
Sent: 23 August 2013 11:00
To: 'Bielefield SafetyList'
Subject: Re: [SystemSafety] SIL ratings to be scrapped?

 

It is interesting to see this evolution in UK while at the same time the major defense operators (DCNS, Nexter, EADS, ...) in France are adopting IEC61508 straightforward and including it in their requirements, included for retrofits ...

 

Bertrand RICQUE

Program Manager, Optronics and Defense Division

 

T +33 (0)1 58 11 96 82

M +33 (0)6 87 47 84 64

23 avenue Carnot 

91300 MASSY - FRANCE 

http://www.sagem-ds.com <http://www.sagem-ds.com/> 

 

  

 

From: systemsafety-bounces at lists.techfak.uni-bielefeld.de [mailto:systemsafety-bounces at lists.techfak.uni-bielefeld.de] On Behalf Of SPRIGGS, John J
Sent: Friday, August 23, 2013 11:56 AM
To: 'Inge, James Mr'; 'Bielefield SafetyList'
Subject: Re: [SystemSafety] SIL ratings to be scrapped?

 

The SILs of the Defence Standard were different from those of IEC61508, which fact I have seen cause problems on more than one project...

I would not be at all surprised if the chattering classes take a DEF.STAN. change made almost a decade ago as an indicator of an imminent change in 61508.

From: systemsafety-bounces at lists.techfak.uni-bielefeld.de [mailto:systemsafety-bounces at lists.techfak.uni-bielefeld.de] On Behalf Of Inge, James Mr
Sent: 23 August 2013 10:41
To: Bielefield SafetyList
Subject: Re: [SystemSafety] SIL ratings to be scrapped?

 

It is possible that this rumour might relate to the current work underway to revise Def Stan 00-55, Requirements for Safety Related Software in Defence Systems.

 

A system of SILs was defined Def Stan 00-56 Issue 2, Safety Management Requirements for Defence Systems (1996), which was also used in Def Stan 00-55.  However, SILs were removed from the mandatory part of 00-56 in Issue 3 (2004) as part of the move to a goal-based approach to requirements setting.  Instead, the guidance in 00-56 Part 2 discussed setting integrity requirements in generic terms, rather than using a specific SIL scheme.  However, the guidance made it clear (in Annex C, section C.2) that SIL schemes could still be used where they were suitable.  

 

Def Stan 00-55 was made obsolescent by the release of 00-56 Issue 3, and has not been re-issued.  However, new work is currently underway to revise both standards.  I have not seen recent drafts, but it is likely that neither standard will define a system of SILs, or require use of a specific SIL scheme.  That said, it is also likely that use of suitable standard that incorporates SILs or a similar concept could still be part of the argument to demonstrate compliance with either 00-55 or 00-56.

 

Regards,

 

          James Inge

 

 

________________________________

From: systemsafety-bounces at lists.techfak.uni-bielefeld.de [mailto:systemsafety-bounces at lists.techfak.uni-bielefeld.de] <mailto:%5bmailto:systemsafety-bounces at lists.techfak.uni-bielefeld.de%5d>  On Behalf Of Dominey, Alan (UK)
Sent: 21 August 2013 16:59
To: safetyyork at phaedsys.com; 'Bielefield SafetyList'
Subject: Re: [SystemSafety] SIL ratings to be scrapped?

 

I think there may have been a misunderstanding somewhere along the way here.

 

UK MoD implemented the use of SILs into many of their projects a few years ago and these are now being replaced by

SIRs  -  Safety Integrity Requirements  ( High / Medium / Low) . . .  Don't know if this is a pointer in any direction . . .

 

        Many Thanks 

        Regards

        Alan

        Alan G. Dominey

        Electrical Safety Engineer 

        Torpedo Capability Contract Project Surveillance Manager

        Spearfish Safety Group

*      BAE Systems,  Maritime Services

Building 31, Broad Oak Business Park,

Airport Service Road, Portsmouth, Hampshire.  PO3 5PQ 

United Kingdom

*   E-mail:   alan.dominey at baesystems.com <mailto:alan.dominey at baesystems.com>   /  alan.dominey at baesystems.r.mil.uk <mailto:alan.dominey at baesystems.r.mil.uk> 

*      Direct Dial: +44 (0) 23 9251 5499 

7     Fax: +44 (0) 23 9222 6922

       Mob: +44 (0)7970 983792

       www.baesystems.com <http://www.baesystems.com/>  

 

         BAE Systems Integrated System Technologies Limited  

         Registered Office: Warwick House, PO Box 87, Farnborough Aerospace Centre, Farnborough, Hants, GU14 6YU, UK.

         Registered in England & Wales No: 3456325

 

         P don't print this e-mail unless you need to 

 

         This email, together with any attachments, is for the exclusive and confidential use of the addressee(s). 

         Any other distribution,         use or reproduction without the sender's prior consent is unauthorised and strictly prohibited.

         If you have received this message in error, please notify the sender by email immediately and delete the message from your 

         computer without making any copies.  All reasonable precautions have been taken to ensure no viruses are present in this e-mail.

         BAE SYSTEMS Electronics Limited cannot accept responsibility for loss or damage arising from the use of this e-mail or

         attachments and recommend that you subject these to virus checking procedures prior to use.

 

 

 

From: systemsafety-bounces at lists.techfak.uni-bielefeld.de [mailto:systemsafety-bounces at lists.techfak.uni-bielefeld.de] <mailto:%5bmailto:systemsafety-bounces at lists.techfak.uni-bielefeld.de%5d>  On Behalf Of Chris Hills 
Sent: 21 August 2013 15:26
To: 'Bielefield Safety List'
Subject: [SystemSafety] SIL ratings to be scrapped?

 

Hi all,

 

I have just been taking to one of my customers who do control systems for industrial systems.  They have been told by someone they are doing a system for that SIL ratings will "soon be scrapped".    Apparently "It will be replaced by ALARP".  This seems like a completely misunderstood half a message.   Though usually on this sort of thing there is a grain of reality (if miss reported or miss represented) in there somewhere. 

 

I know I have not been paying attention over the summer but I haven't seen anything. Is  there a move on any standard to change from SIL ratings for projects? 

 

 

Regards 

     Chris 

    

Eur Ing Chris Hills BSc CEng MIET MBCS FRGS FRSA Technical Specialist
Phaedrus Systems Ltd Tel:  FREEphone 0808 1800 358
Vat GB860621831  Co Reg #04120771
Http://www.phaedsys.com <http://www.phaedsys.com/>  chills at phaedsys.com 

 

 

________________________________

If you are not the intended recipient, please notify our Help Desk at Email Information.Solutions at nats.co.uk immediately. You should not copy or use this email or attachment(s) for any purpose nor disclose their contents to any other person. 

NATS computer systems may be monitored and communications carried on them recorded, to secure the effective operation of the system. 

Please note that neither NATS nor the sender accepts any responsibility for viruses or any losses caused as a result of viruses and it is your responsibility to scan or otherwise check this email and any attachments. 

NATS means NATS (En Route) plc (company number: 4129273), NATS (Services) Ltd (company number 4129270), NATSNAV Ltd (company number: 4164590) or NATS Ltd (company number 3155567) or NATS Holdings Ltd (company number 4138218). All companies are registered in England and their registered office is at 4000 Parkway, Whiteley, Fareham, Hampshire, PO15 7FL. 

________________________________

#
" Ce courriel et les documents qui lui sont joints peuvent contenir des informations confidentielles ou ayant un caractère privé. S'ils ne vous sont pas destinés, nous vous signalons qu'il est strictement interdit de les divulguer, de les reproduire ou d'en utiliser de quelque manière que ce soit le contenu. Si ce message vous a été transmis par erreur, merci d'en informer l'expéditeur et de supprimer immédiatement de votre système informatique ce courriel ainsi que tous les documents qui y sont attachés."
******
" This e-mail and any attached documents may contain confidential or proprietary information. If you are not the intended recipient, you are notified that any dissemination, copying of this e-mail and any attachments thereto or use of their contents by any means whatsoever is strictly prohibited. If you have received this e-mail in error, please advise the sender immediately and delete this e-mail and all attached documents from your computer system."
#

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.techfak.uni-bielefeld.de/mailman/private/systemsafety/attachments/20130823/e6aa5f48/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 681 bytes
Desc: image002.jpg
URL: <https://lists.techfak.uni-bielefeld.de/mailman/private/systemsafety/attachments/20130823/e6aa5f48/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1835 bytes
Desc: image001.jpg
URL: <https://lists.techfak.uni-bielefeld.de/mailman/private/systemsafety/attachments/20130823/e6aa5f48/attachment-0003.jpg>


More information about the systemsafety mailing list