[SystemSafety] NYTimes: The Next Accident Awaits

Peter Bernard Ladkin ladkin at rvs.uni-bielefeld.de
Tue Feb 4 10:12:44 CET 2014



On 2/4/14 1:42 AM, Nancy Leveson wrote:
> were simply the first 15 references that came up when I googled "safety case" and "safety case
> regime." .....It would be best to
> create a new term rather than use a term that has been defined for decades and is widely used to
> have a specific meaning..

Oh, my!

A random Google search for the term "safety case" is as least as likely to turn up this discussion
as anything else. That's not necessarily how you go about finding out what the term might mean. (My
search turns up Nancy's paper in the first fifteen. Given the current discussion, I am tempted to
regard that as *proof* that such a search isn't going to tell you what the term might mean :-) ).

A *goal-oriented* (rather than random Google) search in the WWW for the notion of "safety case"
could profitably start with the UK HSE, since Lord Cullen is the source both for the original
recommendation concerning the notion of "Safety Case", in those words, and the origin of the HSE.

One finds, on searching the HSE WWW site for the term "safety case", references to the legislation
for offshore oil/gas installations, namely the England&Wales law known as Offshore Installations
(Safety Case) Regulations 2005 (there are earlier versions). This law is *very prescriptive* as to
what has to be included in an offshore installation Safety Case - you can read it at
http://www.legislation.gov.uk/uksi/2005/3117/schedule/2/made

One also finds references to the legislation for railways, namely the England&Wales law known as
Railways (Safety Case) Regulations 2003 (there are earlier versions). This law is *prescriptive* as
to what has to be included in a railway Safety Case - you can read it at
http://www.legislation.gov.uk/uksi/2003/579/contents/made

It should be evident that a Safety Case for an offshore installation and a Safety Case for a railway
are *two different things*, because these two enterprises use different kit: pipes and pumps and
drills versus rails and locomotives and carriages. So rather than
> a term that has been defined for decades and is widely used to have a specific meaning
there are at least two specific meanings in English law alone.

It is also absurd to suggest that either of these Safety Cases is just some argument put together to
fulfil a goal-oriented safety standard. First, they are not there to fulfil any standard, they are
the law of England and Wales (I say again: standards aren't laws). Second, they are *prescriptive* -
what shall be in a Safety Case designated as such in these industries is specified precisely in the
law.

So, sticking with Safety Cases with upper-case initial letters (or at least with mid-size initials),
here is the definition of a Safety Case for the nuclear industry in Britain (notice this is not a
law - the ONR surveys installations in Britain, and Britain has three separate legal regimes:
England and Wales, Scotland, and Northern Ireland)

[begin quote from: Purpose and Scope of Safety Cases NS-TAST-GD-051 Revision 3]

5.	DEFINITION OF A NUCLEAR SAFETY CASE
5.1.	A nuclear safety case is a set of documents that describe the radiological hazards in terms of
a facility or site and modes of operation (including potential undesired modes) and the measures
that prevent or mitigate against harm being incurred. The safety case should provide a coherent
demonstration that relevant standards have been met and that risks to persons have been reduced to
as low as reasonably practicable (ALARP).

[end quote]

So there is, already, the third meaning. (To spell it out: neither of the previous two regulations
"describe the radiological hazards" of a railway or an offshore installation.) It is obviously not
as prescriptive as the first two, but it is still prescriptive.

So let's move to a generic definition, as embodied in a standard which is, by the agreement forming
the European Union, the standard governing safety related electronic systems for railway signalling
in 28 European countries (EN 50129:2003, the document referenced by Les Chambers, in case readers
haven't pursued the link):

[begin quote EN 50129:2003 Section 3 Terms and Definitions]

3.1.49 safety case
the documented demonstration that the product complies with the specified safety requirements

[end quote]

This is obviously a fourth definition, since it makes no reference to pipes&pumps and stuff, or to
rails&locomotives and stuff, or to radiological hazards of a facility and stuff. Unlike the first
three definitions, it is not prescriptive at all.

Then there is my definition, which might as well be this: a rigorous argument, given in detail in a
specified set of documents which include all the evidence used in the argument, that a system is
acceptably safe, both when it is operating and when it is not operating.

Notice that there is no requirement that all these documents have to reside in one place. It covers
FAA and EASA certification practices and it is intended to cover the capital-letter Safety Case
regimes above with a suitable interpretation of "acceptably safe".

I'll leave it as an exercise to point out the differences between my definition and the previous four.

Here's another, from
https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/27585/SMP12v22final.pdf

[begin quote UK MoD SMP 12 Version 22, citing Def Stan 00-56 Version 4]

A structured argument, supported by a body of evidence that provides a compelling, comprehensible
and valid case that a system is safe for a given application in a given environment.

[end quote]

So, unlike offshore installations or UK railways, a given MoD system might have a plethora of safety
cases, if there are a plethora of applications in a plethora of environments. As well as depending
on the possibly-varying meaning of the system property "safe". (I'd guess this is intended to mean
something similar to my term "acceptably safe".)

So much for "widely used to have a specific meaning"! More accurate would be to use the plural. It
should also be evident that whether a safety case is narrowly prescriptive or more free in form
depends on which industry, regulation and country you might be talking about.

It's perfectly possible for there to be a good argument that the regime in Offshore Installations
(Safety Case) Regulations 2003 in England & Wales "would not work" in the US oil/gas industry, as
Nancy has indicated she believes. Such an argument would not obviously generalise to, say, FAA
civilian aerospace certification documentation, which also forms a safety case - indeed people like
me would say that that civilian aerospace safety cases are pretty good in general, while pointing
out that they are by no means perfect, indeed it is possible to think that overall they are pretty
good but specifically concerning avionics SW they are pretty poor.

It is also possible to consider FAA safety cases de re free-form (a manufacturer can provide what
evidence it wants to establish a certification goal set by negotiation between regulator and
manufacturer, for example on certification of lithium-ion batteries for the Boeing 787) and de facto
prescriptive (if manufacturers have provided such-and-such documentation for successful
certification of kit X in the past, then it is pretty much de rigeur that a manufacturer will have
to provide at least the equivalent of that for future kit-X certification proceedings. The
certification requirements, and therefore the recertification documentation, after the Boeing 787
battery fires were *modified* from what they had been, not thrown away and rewritten).

PBL

Prof. Peter Bernard Ladkin, Faculty of Technology, University of Bielefeld, 33594 Bielefeld, Germany
Tel+msg +49 (0)521 880 7319  www.rvs.uni-bielefeld.de






More information about the systemsafety mailing list